Journal of Civil, Construction and Environmental Engineering

Volume 3, Issue 3, June 2018

  • Effect of Boron Active Belite Cement on the Compressive Strength of Concrete Exposed to High Temperatures

    Abdulkadir Cüneyt Aydın, Ülviye Gülsüm Haşiloğlu Aras, Türkay Kotan, Ali Öz

    Issue: Volume 3, Issue 3, June 2018
    Pages: 47-52
    Received: 31 May 2018
    Accepted: 21 June 2018
    Published: 16 July 2018
    Downloads:
    Views:
    Abstract: The boron active belite (BAB) cement is a cement type different from Portland cement due to the presence of B2O3 at 3-4%, low hydration temperature, low early strength and high final strength. In this study, concretes with three similar gradations were produced using BAB, CEM I 42.5 and CEM II 32.5 cements. Prepared cylindrical (Ø100/200 mm) concre... Show More
  • Application of BIM Technology in the Drawing Deepening Stage of China Port Museum

    Wang Zhanliang, Tian Xiugang

    Issue: Volume 3, Issue 3, June 2018
    Pages: 53-63
    Received: 5 June 2018
    Accepted: 6 July 2018
    Published: 1 August 2018
    Downloads:
    Views:
    Abstract: Combined with the project of China Port Museum, the Paper has mainly introduced the application of BIM technology in the stage of deepening design of complex architecture projects. Through the three-dimensional model, it can quickly find and solve the contradictions and design mistakes in the drawings, having perfected the structure system, optimiz... Show More
  • Behavior of Axially Loaded CFRP Confined Large-Scale Capsule-Shaped RC Short Columns with Higher Cross-Sectional Aspect Ratio

    Abd El Rahman Megahid Ahmed, Omar Ahmed Farghal, Walied Ahmed Bazar

    Issue: Volume 3, Issue 3, June 2018
    Pages: 64-77
    Received: 4 July 2018
    Accepted: 12 July 2018
    Published: 7 August 2018
    Downloads:
    Views:
    Abstract: This paper aimed to experimentally and analytically investigate the behavior of reinforced concrete (RC) short capsule-shaped columns confined with carbon fiber-reinforced polymer (CFRP) sheets. The efficiency of FRP-confined strengthening system depends mainly on different encountered parameters such as the FRP confinement ratio, shape and size of... Show More
  • Effect of Curing Methods on the Compressive Strength of Kenaf Stabilised ‘Green’ Lateritic Mortar

    Temitope Oyeniran, Olayinka Omotosho, Babatunde Olanrewaju

    Issue: Volume 3, Issue 3, June 2018
    Pages: 78-82
    Received: 13 April 2018
    Accepted: 7 May 2018
    Published: 16 August 2018
    Downloads:
    Views:
    Abstract: The study considered the effects of curing methods on the compressive strength of kenaf stabilised lateritic mortar at 1:5 and 1:10 cement-aggregate mix ratio. Composition of the mortar for each of the cement mix ratios was also substituted with kenaf fibres at 0, 0.5, 1.0, 1.5, 2.0 and 2.5% by weight. The effects of these factors on compressive st... Show More
  • The Theory of Zero Incident Safety Management

    Yin Wang, Fletcher Griffis

    Issue: Volume 3, Issue 3, June 2018
    Pages: 83-98
    Received: 20 June 2018
    Accepted: 7 July 2018
    Published: 16 August 2018
    Downloads:
    Views:
    Abstract: Despite the dramatic improvements in construction safety made over the past few decades, the construction industry as a whole is still nowhere near reaching the Zero Injury goal, let alone the Zero Incident goal. The purpose of this paper is to provide an approach to continue improvements of safety performance in order to reach the Zero Incident go... Show More